nuclide/Documentation/Materials/commands/fogparms.md

Materials: Commands

fogparms

Syntax

fogParms

Overview

Note: you must also specify "surfaceparm fog" to cause vmap to identify the surfaces inside the volume. Fogparms only describes how to render the fog on the surfaces.

red value, green value, blue value: These are normalized values. To obtain the values that define fog color divide the desired color's Red, Green and Blue values by 255 to obtain three normalized numbers within the 0.0 to 1.0 range.

distance to opaque: This is the distance, in game units, until the fog becomes totally opaque, as measured from the point of view of the observer. By making the height of the fog brush shorter than the distance to opaque, the apparent density of the fog can be reduced (because it never reaches the depth at which full opacity occurs).

Notes

• The fog volume can only have one surface visible (from outside the fog).
• Fog must be made of one brush. It cannot be made of adjacent brushes.
• Fog brushes must be axial. This means that only square or rectangular brushes may contain fog, and those must have their edges drawn along the axes of the map grid (all 90 degree angles).

Design Notes:

• If a water texture contains a fog parameter, it must be treated as if it were a fog texture when in use.
• If a room is to be filled completely with a fog volume,it can only be entered through one surface (and still have the fog function correctly).
• Additional shader passes may be placed on a fog brush, as with other brushes.